Don't Tread On Me Gadsden Flag Side Windows Printed Decals

Don't Tread On Me Gadsden Flag Side Windows Printed Perforated Vinyl Decal

Write a Review

Your Price: $69.99

Retail Price:$119.99

You Save:$50.00(42%)

Upgrade your Jeep Wrangler with the Don't Tread On Me Gadsden Flag Flag Side Windows Decal Set, tailored for 2007 to current models. These high-quality, perforated vinyl decals showcase the iconic Don't Tread On Me Gadsden Flag Flag, enhancing your vehicle's look while providing privacy and UV protection.

Questions about this item? Be the first to ask here.

Part Number: CDD1165

Availability: Contact Us For Custom Design Ideas!!!

Pick Your Wrangler Model *

Quantity

Description
DISCLAIMER
Installation Instructions

Elevate the appearance of your Jeep Wrangler with our Don't Tread On Me Gadsden Flag Flag Side Windows Printed Perforated Vinyl Decal Set. Tailored exclusively for models from 2007 to the current year, this decal set embodies pride and patriotism with a unique touch. Showcasing the vibrant and iconic Don't Tread On Me Gadsden Flag Flag, it transforms your vehicle into a moving tribute to the Great Land, ensuring your Jeep stands out with distinction on any road or trail.

Required Tools:
Retractable razor blade, Squeegee, Tape measure/ Ruler, Spray bottle full of alcohol.
Optional: For a less aggressive initial tack but longer drying time, you can spray the tacky surface of your decal and the surface of your vehicle to allow for flexibility in positioning. Allow at least 10 minutes of drying time. Be sure to check for tack before removing the transfer tape.

All surfaces must be considered dirty and must be cleaned before the application of the vinyl decal. Painted metals should be cleaned with an automotive detergent. Wipe the surface dry with a clean, dry, lint-free cloth.

Step 1: Tape in Place
Align the decal, and line the vinyl up with a horizontal line near it. Use a level to be sure it is straight and even. Place masking tape on the corners to hold it in place. Add a line of masking tape along the top of the decal once you are happy with the position - this is to prepare for hinging.

Step 2: Remove the Backing Paper
Hinge the decal toward masking tape and slowly peel the backing from the corner. Peel carefully from one side to the other and peel down until the backing paper is removed. Hold the center of the decal taught and keep the decal from touching the surface.

Step 3: Applying Your Decal
With a squeegee, starting at the center of the decal and working outward, firmly swipe down and out, pushing the vinyl onto the vehicle. Use smooth strokes from the center outward to push air bubbles out. Be sure to press every section of the decal down. Go over the decal again with your squeegee, ensuring it's applied.

Step 4: Remove Transfer Tape and Trim (if necessary)
Remove the application tape, keeping it flat with the surface. Do this process slowly, watching the decal applied to the surface correctly. Use a retractable razor blade trim along door openings and fold excess vinyl inward. Ensure the vinyl graphic has been applied completely and evenly on the vehicle.

Tip: If bubbling occurs, poke tiny dots with a sharp point of an exacto knife (careful not to cut or poke too hard) and smooth the vinyl down with your finger.

Tattered American Flag Rear Quarter Window Decals Fits 2021+ Bronco Sport

$49.99

Select Options

Maryland State Flag Spare Tire Cover With Backup Camera Hole Option

~~$69.99~~ $55.99 Sale

Select Options

Spectrum of Unity Spare Tire Cover With Backup Camera Hole Option

~~$69.99~~ $55.99 Sale

Select Options

High Quality Felt Edge Squeegee 4" Inch for Car Vinyl Scraper Decal Applicator Tool with Black Fabric Felt Edge

$4.99

(3)

Add To Cart

Microfiber Cleaning Cloth

$3.99

(1)

Add To Cart

Color Snap Blade Utility Knife

$2.50

(1)

Add To Cart

Don't Tread On Me Gadsden Flag Side Windows Printed Perforated Vinyl Decal

Choose Options

You May Also Enjoy

Installation Tools & Accessories

Recently Viewed Items