Ghostbusters Inspired Stay Puft Marshmallow Man Doesn't Care About Your Stick Figure Family Vinyl Decal

Stay Puft Marshmallow Man Doesn't Care About Your Stick Figure Family Vinyl Window Decal

2 Review(s) Write a Review

Your Price: $12.99

Collectible Decals Ghostbusters Inspired Stay Puft Marshmallow Man Doesn't Care About Your Stick Figure Family Vinyl Decal

Questions about this item? Be the first to ask here.

Part Number: CDD0133

Availability: Contact Us For Custom Design Ideas!!!

651 Vinyl Color Option *

Longest Side *

Quantity	Price
2	$12.34
3 - 4	$11.69
5 - 9	$11.04
10+	$9.74

Quantity

Description
Product Features
Customer Reviews
Installation Instructions

Ghostbusters Inspired Stay Puft Marshmallow Man Doesn't Care About Your Stick Figure Family Vinyl Decal.
Available in various colors.
Excellent Quality Decals.
The decal can be applied to almost any surface.

Quality Jeep Window Decals

Looking for Jeep Decals? You have found the best selection of made to order Die Cut decals right here at Jeep Decal Store. We use a high-quality Oracal 651 vinyl 5-8 year outdoor safe permanent solvent-based adhesive vinyl. Not just limited to jeep windows, you can use these decals on any smooth hard surface. Fenders, bumpers, mirrors, doors, Macbook, PC, ammo boxes, or whatever you fancy. If you would like a custom size or personalization please contact us with the details for a quote.

Decals have no background Ã‚Â– The white Portion (or colors in the full color decals) in the above image is the decal, the black or dark color represents your window or surface. The photos may not depict the decal to exact scale so please check the measurements listed.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Reviews Sorting

Good sticker

I purchased this for a Lemons Rally Stay Puft themed car. Very happy with this sticker. I ordered the smallest size. It was a real pain to apply using the wet method (Rapid Tac II) I spent at least 30 minutes carefully pulling back the adhesive from the vinyl. The little letters did not want to stick. Next time I’d use a heat gun and let it dry overnight but I was in a rush to hit the road. Definitely not the vinyls faults.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: (Verified Buyer) Rusty Zipper from Syracuse, NY on 12/18/2021

Nice Sticker

Nice looking sticker.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: (Verified Buyer) Katherine B. from LANCASTER, PA on 12/11/2018

Required Tools:
Retractable razor blade, Squeegee, Tape measure/ Ruler, Spray bottle full of alcohol.
Optional: For a less aggressive initial tack but longer drying time, you can spray the tacky surface of your decal and the surface of your vehicle to allow for flexibility in positioning. Allow at least 10 minutes of drying time. Be sure to check for tack before removing the transfer tape.

All surfaces must be considered dirty and must be cleaned before the application of the vinyl decal. Painted metals should be cleaned with an automotive detergent. Wipe the surface dry with a clean, dry, lint-free cloth.

Step 1: Tape in Place
Align the decal, and line the vinyl up with a horizontal line near it. Use a level to be sure it is straight and even. Place masking tape on the corners to hold it in place. Add a line of masking tape along the top of the decal once you are happy with the position - this is to prepare for hinging.

Step 2: Remove the Backing Paper
Hinge the decal toward masking tape and slowly peel the backing from the corner. Peel carefully from one side to the other and peel down until the backing paper is removed. Hold the center of the decal taught and keep the decal from touching the surface.

Step 3: Applying Your Decal
With a squeegee, starting at the center of the decal and working outward, firmly swipe down and out, pushing the vinyl onto the vehicle. Use smooth strokes from the center outward to push air bubbles out. Be sure to press every section of the decal down. Go over the decal again with your squeegee, ensuring it's applied.

Step 4: Remove Transfer Tape and Trim (if necessary)
Remove the application tape, keeping it flat with the surface. Do this process slowly, watching the decal applied to the surface correctly. Use a retractable razor blade trim along door openings and fold excess vinyl inward. Ensure the vinyl graphic has been applied completely and evenly on the vehicle.

Tip: If bubbling occurs, poke tiny dots with a sharp point of an exacto knife (careful not to cut or poke too hard) and smooth the vinyl down with your finger.

Celestial Yeti Chronicles Spare Tire Cover With Backup Camera Hole

~~$69.99~~ $55.99 Sale

Select Options

Halloween Shadow Pumpkin Patch Spare Tire Cover With Backup Camera Hole Option

~~$69.99~~ $55.99 Sale

Select Options

Thin Red Line Subdued American Flag Spare Tire Cover With Backup Camera Hole Option

~~$69.99~~ $55.99 Sale

Select Options

High Quality Felt Edge Squeegee 4" Inch for Car Vinyl Scraper Decal Applicator Tool with Black Fabric Felt Edge

$4.99

(3)

Add To Cart

Color Snap Blade Utility Knife

$2.50

(1)

Add To Cart

Microfiber Cleaning Cloth

$3.99

(1)

Add To Cart

Stay Puft Marshmallow Man Doesn't Care About Your Stick Figure Family Vinyl Window Decal

Choose Options

Quantity Pricing

Average Customer Ratings

You May Also Enjoy

Installation Tools & Accessories

Recently Viewed Items