Microfiber Cleaning Cloth-CDD1439

Microfiber Cleaning Cloth

1 Review(s) Write a Review

Your Price: $3.99

Retail Price:$5.99

You Save:$2.00(33%)

Collectible Decals Microfiber Cleaning Cloth

Questions about this item? Be the first to ask here.

Part Number: CDD1439

Availability: Contact Us For Custom Design Ideas!!!

Quantity

Description
Customer Reviews
Installation Instructions

Give your vehicle a clean-and-shine with these lint-free cleaning cloths. The microfiber material on these cleaning cloths lifts and traps dust without scratching. After cleaning up, just toss them in the washer and reuse them again.

Of course, tools can't guarantee you a flawless result, unless you know how to use them, so we always encourage you to make reading the application instructions for your decals your very first step. Vinyl Installing Tool Fabric Felt Wrapped Squeegee Medium Hardness

Product Description

Lifts and traps dust to prevent scratches.
Nonabrasive for delicate surfaces
Machine wash and dry
Size: 12 x 12inch.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Reviews Sorting

Useful

This was useful in cleaning the area of my jeep prior to installing the hood decal. Thumbs Up!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: (Verified Buyer) Jeff M. from Wyomissing, PA on 1/13/2021

Required Tools:
Retractable razor blade, Squeegee, Tape measure/ Ruler, Spray bottle full of alcohol.
Optional: For a less aggressive initial tack but longer drying time, you can spray the tacky surface of your decal and the surface of your vehicle to allow for flexibility in positioning. Allow at least 10 minutes of drying time. Be sure to check for tack before removing the transfer tape.

All surfaces must be considered dirty and must be cleaned before the application of the vinyl decal. Painted metals should be cleaned with an automotive detergent. Wipe the surface dry with a clean, dry, lint-free cloth.

Step 1: Tape in Place
Align the decal, and line the vinyl up with a horizontal line near it. Use a level to be sure it is straight and even. Place masking tape on the corners to hold it in place. Add a line of masking tape along the top of the decal once you are happy with the position - this is to prepare for hinging.

Step 2: Remove the Backing Paper
Hinge the decal toward masking tape and slowly peel the backing from the corner. Peel carefully from one side to the other and peel down until the backing paper is removed. Hold the center of the decal taught and keep the decal from touching the surface.

Step 3: Applying Your Decal
With a squeegee, starting at the center of the decal and working outward, firmly swipe down and out, pushing the vinyl onto the vehicle. Use smooth strokes from the center outward to push air bubbles out. Be sure to press every section of the decal down. Go over the decal again with your squeegee, ensuring it's applied.

Step 4: Remove Transfer Tape and Trim (if necessary)
Remove the application tape, keeping it flat with the surface. Do this process slowly, watching the decal applied to the surface correctly. Use a retractable razor blade trim along door openings and fold excess vinyl inward. Ensure the vinyl graphic has been applied completely and evenly on the vehicle.

Tip: If bubbling occurs, poke tiny dots with a sharp point of an exacto knife (careful not to cut or poke too hard) and smooth the vinyl down with your finger.

Halloween Trick or Treat Perforated Rear Quarter Window Decals - Fits 2021+ 4 Door Ford Bronco

$69.99

Add To Cart

Sons of Alderaan Rebel Scum Spare Tire Cover With Backup Camera Hole

~~$69.99~~ $55.99 Sale

Select Options

Yin-Yang Owls Spare Tire Cover With Backup Camera Hole